Sunday, November 27, 2011

Thousand Oaks Heating- Air Source Heat Pump

By Shelby Maddux

Heat pumps are equipments used in homes and establishments which uses heat from one place and transfers it to another in a higher temperature. But keeping in mind that your heating systems are efficient, cost effective and being environmentally friendly should also be considered. Besides Air source heat pumps, other types of heat pumps are also provided depending on the availability of resources; the Ground source heat pumps and the Water source heat pumps. Then Underfloor Heating Insulation is the right system for you.

It has similar way of providing heat but the big difference is the heating elements are on the walls and on the floor rising up into the room.Radiant floor heating performs better than standard baseboard heating. It can also be installed easily to any room or for the whole house.

It can only mean that energy efficient air source heat pumps can provide reduced annual fuel bills. Air source heat pumps are also easier to install, which is the reason apartments are using these kinds of heat pumps more commonly. Air source heat pumps are also capable of having reverse-cycle which means that it has both heating and cooling features like all geothermal heat pumps.

And with this quality, it also gives the air source heat pumps the capability of offering additional heating and domestic hot water options. Whereas to also to slow down the heat loss to the sub-floor, and improve the performance of the underfloor heating, you can use high quality thermal barriers and further increase the speed of the initial warm up time, and consequently reduce electiricty cost. And ideally the system must be linked via a fused spur, which will isolate the system for any maintenance requirements of the heating system.

Air source heat pumps are not as efficient as other heat pumps, such as ground and water source heat pumps. This type is infrequently installed because air does not retain heat well therefore is not that efficient in heating up residential buildings. However, it is advised that hot water is heated to above 60C, which may not be possible for some units if outside temperature dips.

Electrical underfloor heating is also available for the outdoor environment. Some are designed to provide heat for driveways, ramps and porches. Therefore clearing your drive way from snow and ice will be no more.

With those in mind comparing the advantages of an Air source heat pump with its counterparts should need to be considered to suit your need. Even though insulation for your underfloor heating may seem like an additional cost, it will pay you back many times because of the energy usage saved. We should keep in mind that fans and compressors make noise.

As much as possible we should try position the outside unit far from windows of the building and the nearby establishments. All external units should have a sound rating of 76 decibels or lower. Choose a heat pump that has defrosted control.

This will reduce the supplementary electrical energy use for heating by the heat pump. Make sure that the outdoor unit is protected from high winds because this may affect the efficiency of the heat absorption process. And if you will be going to use the heat pump more in the heating mode rather than the cooling mode then installing the indoor unit in a low wall position is better as this will increase its heating efficiency.

There you have it, all the know how on buying Air source heat pumps.

About the Author:


Post a Comment