Sunday, November 27, 2011

Kingwood Heating- Underfloor Heating Insulation During Winter

By Shelby Maddux

Heat pumps are equipments used in homes and establishments which uses heat from one place and transfers it to another in a higher temperature. In another perspective, Air source heat pump absorbs the heat from the air outside and transfers it inside buildings during winter in a warmer temperature. Besides Air source heat pumps, other types of heat pumps are also provided depending on the availability of resources; the Ground source heat pumps and the Water source heat pumps. It can be fitted under every floor type or lain on an existing floor and covered with a normal floor covering.

It has similar way of providing heat but the big difference is the heating elements are on the walls and on the floor rising up into the room.Air source heat pumps gives fairly lower cost of heating. It can also provide up to four times heat as an electric heater utilizing the same energy.

Modern buildings also heats up more faster than older buildings because heat are more easily retained by modern buildings compared than older buildings. First is to measure the area of the floor to determine the size of the heating mat that is need to be fit, then make a sketch of the area and must include where the power supply will be plugged in. Therefore lesser irritants for those people who has allergies in the room occupying with radiant floor heating and will help them breath easy.

And with this quality, it also gives the air source heat pumps the capability of offering additional heating and domestic hot water options.Air source heat pumps also have its disadvantages that come along with it that is why other types of heat pumps are available for the public. And ideally the system must be linked via a fused spur, which will isolate the system for any maintenance requirements of the heating system.

Air source heat pumps are not as efficient as other heat pumps, such as ground and water source heat pumps. The amount of underfloor heating insulation that will be consumed will depend on the type of building it will be fitted. Then the heating can be turned on for one hour on the first day and increased by on hour every day for six to seven days before leaving the system on continually.

The efficiency and performance of air source heat pumps can be affected by high or no wind conditions and sustained temperatures below freezing.In securing underfloor heating insulation boards to the sub-floor depends on the kind of floor. This involves pumping heated water through tubes that is laid underneath the floor of the room.

With those in mind comparing the advantages of an Air source heat pump with its counterparts should need to be considered to suit your need. Instead of breaking your back on plowing through thick snow, Electrical underfloor heating will do the job for you. Another function of Electrical underfloor heating is for greenhouse.

As much as possible we should try position the outside unit far from windows of the building and the nearby establishments. All external units should have a sound rating of 76 decibels or lower. Choose a heat pump that has defrosted control.

This will reduce the supplementary electrical energy use for heating by the heat pump. Make sure that the outdoor unit is protected from high winds because this may affect the efficiency of the heat absorption process. And if you will be going to use the heat pump more in the heating mode rather than the cooling mode then installing the indoor unit in a low wall position is better as this will increase its heating efficiency.

There you have it, all the know how on buying Air source heat pumps.

About the Author:


Post a Comment