Sunday, November 27, 2011

Addison Heating- Indoor Radiant Floor Heating

By Shelby Maddux

Heat pumps are equipments used in homes and establishments which uses heat from one place and transfers it to another in a higher temperature. But keeping in mind that your heating systems are efficient, cost effective and being environmentally friendly should also be considered. Radiant floor heating involves transports heat from hot surfaces to the occupants of the room. Then Underfloor Heating Insulation is the right system for you.

Here are some of its features and benefits that will help you decide on the type of heat pump you will be having.Systems are available as heating mats: which has heating cables fixed on to a mat. It can be installed by a professional or by an ordinary do-it-yourself buff.

Modern buildings also heats up more faster than older buildings because heat are more easily retained by modern buildings compared than older buildings. Air source heat pumps are also easier to install, which is the reason apartments are using these kinds of heat pumps more commonly. Nevertheless both types of buildings are advisable to have underfloor insulation installed to maximize the heat from the underfloor heating system.

In the market today, there are three types of radiant floor heating systems available for the consumers. These are the radiant air floors, electric radiant floors and the hot water radiant floor heating. Some of these are the following.

Air source heat pumps are not as efficient as other heat pumps, such as ground and water source heat pumps. This type is infrequently installed because air does not retain heat well therefore is not that efficient in heating up residential buildings. However, it is advised that hot water is heated to above 60C, which may not be possible for some units if outside temperature dips.

Electrical underfloor heating is also available for the outdoor environment.In securing underfloor heating insulation boards to the sub-floor depends on the kind of floor. Some Air source heat pumps are also made to be interfering although slim-lined models are available.

For wooden sub-floors, first ensure the floor-boards are firmly fixed to the joists before applying a flexible floor tile adhesive. Instead of breaking your back on plowing through thick snow, Electrical underfloor heating will do the job for you. Another function of Electrical underfloor heating is for greenhouse.

You dont have to suffer anymore with your old fashioned heating systems. All external units should have a sound rating of 76 decibels or lower. Choose a heat pump that has defrosted control.

This will reduce the supplementary electrical energy use for heating by the heat pump. Make sure that the outdoor unit is protected from high winds because this may affect the efficiency of the heat absorption process. And if you will be going to use the heat pump more in the heating mode rather than the cooling mode then installing the indoor unit in a low wall position is better as this will increase its heating efficiency.

There you have it, all the know how on buying Air source heat pumps.

About the Author:


Post a Comment